Timeline
01/04/13:
- 15:12 Changeset in xpra [2446] by
- since we report encoder quality and speed via xpra info, make sure it …
- 14:33 Changeset in xpra [2445] by
- avoid unnecessary I frames and IDR frames altogether, allow open gop, …
- 13:37 TracBackup edited by
- (diff)
- 13:37 TracRoadmap edited by
- (diff)
- 13:37 InterTrac edited by
- (diff)
- 13:37 TracReports edited by
- (diff)
- 13:37 TracPermissions edited by
- (diff)
- 13:37 SandBox edited by
- (diff)
- 13:37 TracNotification edited by
- (diff)
- 13:37 WikiMacros edited by
- (diff)
- 13:37 WikiProcessors edited by
- (diff)
- 13:37 TracAccessibility edited by
- (diff)
- 13:37 TracBrowser edited by
- (diff)
- 13:37 TracRepositoryAdmin edited by
- (diff)
- 13:37 PageTemplates edited by
- (diff)
- 13:37 TracInstall edited by
- (diff)
- 13:37 TracRss edited by
- (diff)
- 13:37 TracPlugins edited by
- (diff)
- 13:37 TracUpgrade edited by
- (diff)
- 13:37 InterWiki edited by
- (diff)
- 13:37 TracWiki edited by
- (diff)
- 13:37 TracStandalone edited by
- (diff)
- 13:37 CamelCase edited by
- (diff)
- 13:37 TracIni edited by
- (diff)
- 13:37 WikiFormatting edited by
- (diff)
- 13:37 TracSyntaxColoring edited by
- (diff)
- 13:37 WikiHtml edited by
- (diff)
- 13:37 TracSupport edited by
- (diff)
- 13:37 TracSearch edited by
- (diff)
- 13:37 TracFineGrainedPermissions edited by
- (diff)
- 13:37 TracModWSGI edited by
- (diff)
- 13:37 TracEnvironment edited by
- (diff)
- 13:37 TracGuide edited by
- (diff)
- 13:37 TracModPython edited by
- (diff)
- 13:37 TracWorkflow edited by
- (diff)
- 13:37 TracInterfaceCustomization edited by
- (diff)
- 13:37 TracFastCgi edited by
- (diff)
- 13:37 TracBatchModify created by
- 13:37 TracCgi edited by
- (diff)
- 13:37 TracLogging edited by
- (diff)
- 13:37 TracNavigation edited by
- (diff)
- 13:37 TracLinks edited by
- (diff)
- 13:37 TracChangeset edited by
- (diff)
- 13:37 TracUnicode edited by
- (diff)
- 13:37 TracImport edited by
- (diff)
- 13:37 TracTickets edited by
- (diff)
- 13:37 WikiNewPage edited by
- (diff)
- 13:37 TracQuery edited by
- (diff)
- 13:37 TracTicketsCustomFields edited by
- (diff)
01/03/13:
- 15:57 Changeset in xpra [2444] by
- add more assert statements (on extract path this time) so we bail out …
- 15:26 Changeset in xpra [2443] by
- * use constants since we have them defined * add more debug info to …
- 14:30 Ticket #230 (allow the user to switch keyboard layout manually at runtime) created by
- Here is a very strange problem: When I connect to xpra session from …
- 13:50 Changeset in xpra [2442] by
- we need "inspect" module for the launcher
- 11:33 Changeset in xpra [2441] by
- exit cleanly with C on win32: * catch event and fire normal exit path …
- 10:21 Changeset in xpra [2440] by
- since we must know whether the ServerSource? is closed from outside the …
- 10:02 Changeset in xpra [2439] by
- update the average delay in ServerSource? so we can use better defaults …
- 08:59 Changeset in xpra [2438] by
- include fewer percentile values by default and no geometric mean/std …
- 08:58 Changeset in xpra [2437] by
- avoid potential (very unlikely) divide by zero
- 08:35 Changeset in xpra [2436] by
- expose client window's xid
- 08:35 Changeset in xpra [2435] by
- make it easier to debug keyboard stuff via env var
- 07:01 Changeset in xpra [2434] by
- update release notes with latest from 0.7.x branch
- 06:56 Changeset in xpra [2433] by
- cache window metadata so we can report more information via xpra info: …
- 05:27 Changeset in xpra [2432] by
- bump to 0.7.7 and add release notes
- 05:23 Changeset in xpra [2431] by
- r2423 for 0.7.x branch: fix counting of queue pixels
- 05:21 Changeset in xpra [2430] by
- r2418 for 0.7.x branch: we cannot send float values with bencoder
- 05:18 Changeset in xpra [2429] by
- avoid division by zero and avoid None dereference (r2419 backport)
- 05:12 Changeset in xpra [2428] by
- fix quality menu
- 03:33 Changeset in xpra [2427] by
- make it easier to turn off opengl on win32 (still default to on for now)
01/02/13:
- 11:30 Changeset in xpra [2426] by
- * honour sound enabled flags in client props * add message to asserts
- 10:01 Changeset in xpra [2425] by
- damage latency improvements: move batch delay calculations to a …
- 07:09 Changeset in xpra [2424] by
- separate more cleanly: * window stats calculations from server_source …
- 07:06 Changeset in xpra [2423] by
- bug: counting pixels in the queue was badly broken - that's the …
- 03:10 Changeset in xpra [2422] by
- split keyboard stuff into its own class
- 03:06 Changeset in xpra [2421] by
- no reason to use cryptic variable names
- 02:30 Changeset in xpra [2420] by
- fix signal handling in proxy: use an empty main thread to be able to …
- 01:13 Changeset in xpra [2419] by
- protocol can be None when we exit (cleanup runs in separate thread)
01/01/13:
- 12:24 Changeset in xpra [2418] by
- we cannot send float values with bencoder (Java and others), so only …
- 11:41 Changeset in xpra [2417] by
- need setup flag for install step too
- 10:47 Changeset in xpra [2416] by
- rpm: don't build parti
- 10:43 Changeset in xpra [2415] by
- make parti truly optional: don't even import it when disabled, and …
- 05:20 Changeset in xpra [2414] by
- correctly skip initial pixel values
- 04:21 Changeset in xpra [2413] by
- oops: debug causes bug
- 04:10 Changeset in xpra [2412] by
- if server does not support info-request, don't bother calling …
- 04:00 Changeset in xpra [2411] by
- update release notes
- 03:55 Changeset in xpra [2410] by
- r2355 (partial) for 0.7.x branch: we use swscale on the server, so the …
- 03:49 Changeset in xpra [2409] by
- r2401 for 0.7.x branch: osx path fix
- 03:47 Changeset in xpra [2408] by
- update release notes
- 03:46 Changeset in xpra [2407] by
- r2404 and r2405 for 0.7.x branch: auto refresh fixes
- 03:42 Changeset in xpra [2406] by
- simplify codecs: don't expose get_client_options method, just return …
- 03:32 Changeset in xpra [2405] by
- fix auto-refresh delay: ensure at least 50ms and unit is in millis (as …
- 03:25 Changeset in xpra [2404] by
- fix auto-refresh delay parsing from info packet (divide after cast!) …
- 03:24 Changeset in xpra [2403] by
- the ratio of damage-in/damage-out can be consistently high and would …
- 03:22 Changeset in xpra [2402] by
- make it easy to call pycallgraph: add command line options to …
12/31/12:
- 08:53 Changeset in xpra [2401] by
- osx fix: the path may have spaces in it!
- 08:50 Changeset in xpra [2400] by
- oops: supports_mmap needs client extras, so move it back to after …
- 08:21 Changeset in xpra [2399] by
- client extras may need access to mmap settings (so move it up)
- 07:10 Changeset in xpra [2398] by
- silence gl format handler logger's annoying warnings on win32
- 06:52 Changeset in xpra [2397] by
- trim down packages we include with py2exe
- 06:12 Changeset in xpra [2396] by
- py2exe fixes and improvements: * allow opengl on win32 * simplify …
12/28/12:
- 19:12 Changeset in xpra [2395] by
- * if double buffered, we must call swap_buffers instead of glFlush * …
- 18:41 Changeset in xpra [2394] by
- win32 needs double buffered!
- 18:40 Changeset in xpra [2393] by
- remove unnecessary imports and use standard glconfig setup code
- 18:30 Changeset in xpra [2392] by
- trimming down imports and code down to almost nothing: …
- 17:56 Changeset in xpra [2391] by
- refactor code and bring the working example closer to the broken one: …
- 17:55 Changeset in xpra [2390] by
- * remove check_support, now done by client * add ability to specify …
- 17:21 Changeset in xpra [2389] by
- don't use wildcard import and remove unnecessary reference to app
- 16:52 Changeset in xpra [2388] by
- split fake client into its own class
- 16:34 Changeset in xpra [2387] by
- sample code that does succeed in loading/binding textures on win32
- 15:55 Changeset in xpra [2386] by
- breakout the gl paint method so we can call it separately, add test …
- 15:17 Changeset in xpra [2385] by
- * export more gl info * show it on session info * add gl icon to …
- 12:50 Changeset in xpra [2384] by
- set flag to avoid re-init everytime
- 10:01 Changeset in xpra [2383] by
- remove debug (oops)
- 09:59 Changeset in xpra [2382] by
- GL enhancements: * move code to a client.py function rather than ugly …
12/27/12:
- 18:54 Ticket #229 (x264 decompress_image_to_yuv crashes on win32 and linux 32 bits) closed by
- invalid: closing: it was opengl corrupting things, the crash was not caused by …
- 18:15 Changeset in xpra [2381] by
- more extensive GL checks: * check that the methods exist and that they …
- 17:31 Changeset in xpra [2380] by
- speed/quality tuning: * more aggressive reduction in speed parameter: …
- 17:27 Changeset in xpra [2379] by
- new factor for batch delay: ratio between damage-in and damage-out, …
- 17:26 Changeset in xpra [2378] by
- support edge resistance parameters via client: add new env values to hello
- 17:25 Changeset in xpra [2377] by
- edge resistance for CSC switching: we keep the current CSC mode longer …
- 15:33 Changeset in xpra [2376] by
- install gl_check and gstreamer_util executables on win32 so we can …
- 07:52 Changeset in xpra [2375] by
- add check for specific extensions we need
- 07:23 Changeset in xpra [2374] by
- don't log nonsensical values in error case
- 07:22 Ticket #229 (x264 decompress_image_to_yuv crashes on win32 and linux 32 bits) created by
- split from #227 when decoding to yuv, we copy each component (Y,U,V) …
- 05:49 Changeset in xpra [2373] by
- common typo + better log message
- 05:49 Changeset in xpra [2372] by
- "outsize" from decompress_image was meaningless and unused, remove it
12/26/12:
- 11:33 Changeset in xpra [2371] by
- fix vpx yuv interface to match our expectations!
- 11:03 Changeset in xpra [2370] by
- move all gtkgl code into check_support and only leave pyopengl import …
- 10:06 Changeset in xpra [2369] by
- also install OpenGL_accelerate
- 10:05 Changeset in xpra [2368] by
- we only require version 1.1, and we test for the extension separately. …
- 08:53 Changeset in xpra [2367] by
- constify version check (so error message matches what we check!)
- 05:48 Changeset in xpra [2366] by
- #228 and... qt does something else, so we need another env var here
- 05:33 Changeset in xpra [2365] by
- add info and link on ubuntu global menu clusterfuck
- 04:23 Changeset in xpra [2364] by
- #228 tell ubuntu to not mess up our children's menus
12/25/12:
- 19:53 Ticket #228 (Send ApplicationMenu data from server to client) created by
- OS: Ubuntu Precise with Unity desktop Applications launched under …
- 19:26 Changeset in xpra [2363] by
- ARB fragment_program requires GL 1.3: …
- 18:22 Changeset in xpra [2362] by
- disable sound again (problems on win32..)
- 18:19 Changeset in xpra [2361] by
- almost everything needed to support opengl on win32: * bundle OpenGL …
- 17:49 Changeset in xpra [2360] by
- avoid warning about group leader on win32
- 12:48 Changeset in xpra [2359] by
- add deps (optional on debian) on numpy python-numeric to avoid …
- 12:40 Changeset in xpra [2358] by
- use explicit synced calls for killing windows
- 10:44 Changeset in xpra [2357] by
- ensure we always call gl_end after calling gl_begin (via gl_init) - …
- 10:42 Changeset in xpra [2356] by
- ensure we still fire the callbacks if an error occurs in …
- 10:41 Changeset in xpra [2355] by
- we use swscale on the server too, so we can't handle small dimensions …
- 10:17 Changeset in xpra [2354] by
- * ensure we always call gl_end after calling gl_begin (via gl_init) * …
- 09:33 Changeset in xpra [2353] by
- * when we re init(), make sure we also re gl_init() * we must hold the …
- 09:27 Changeset in xpra [2352] by
- add pygdkglext version info to debug log
- 08:41 Changeset in xpra [2351] by
- signals can interrupt anything anytime, so clear the output before …
- 08:34 Changeset in xpra [2350] by
- ignore paint which would overflow the backing area
- 08:26 Changeset in xpra [2349] by
- avoid division by zero
- 07:04 Changeset in xpra [2348] by
- try harder to provide a value for "client-machine", even if the window …
- 06:33 Changeset in xpra [2347] by
- undo most of r2332 as it broke with too many drivers, also do gl …
- 06:04 Changeset in xpra [2346] by
- another error callback that needs to run from the UI thread
- 05:24 Changeset in xpra [2345] by
- draw callbacks assume we run from UI thread, so do that on error case …
- 05:00 Changeset in xpra [2344] by
- we always create the GL backing as early as regular one, but we now …
- 04:49 Changeset in xpra [2343] by
- when we destroy() the window, clear the reference to the backing and …
- 04:34 Changeset in xpra [2342] by
- only enable GL windows with video encoders set as default
12/24/12:
- 18:04 Changeset in xpra [2341] by
- if we re-init the same backing, don't do gl_begin again, and if the …
- 17:59 Changeset in xpra [2340] by
- if we're told to, always store the delta - even when we failed to paint it
- 17:27 Changeset in xpra [2339] by
- we don't care if the last stored delta sequence is not the previous …
- 17:11 Changeset in xpra [2338] by
- index on (no branch): d30def8 GL_FRAGMENT_PROGRAM_ARB should be in …
- 17:04 Changeset in xpra [2337] by
- GL_FRAGMENT_PROGRAM_ARB should be in fragment_program
- 16:50 Changeset in xpra [2336] by
- fix radeon: ensure we flush to see things on screen, also ensure …
- 16:39 Ticket #147 (GL acceleration for client rendering) reopened by
- re-opening: * r2332 breaks radeon and does not work reliably with …
- 14:59 Changeset in xpra [2335] by
- import OpenGL bits earlier so we fail before setting gl as the client …
- 14:53 Changeset in xpra [2334] by
- add missing carriage returns (since we use fd.write instead of print)
12/22/12:
- 10:34 Ticket #147 (GL acceleration for client rendering) closed by
- fixed: closing, see #226 for osx and #227 for win32
- 10:34 Ticket #227 (opengl rendering on win32) created by
- split from #147 (see also #226 for osx) There are no official …
- 06:51 Ticket #226 (opengl rendering on osx) created by
- split from #147 I thought that buiding (py)gtkgl on osx would be a …
12/21/12:
- 14:42 Changeset in xpra [2333] by
- default to enable opengl since this now works very well!
- 14:41 Changeset in xpra [2332] by
- keep hold of the same drawable reference for the lifetime of the gl …
- 10:03 Changeset in xpra [2331] by
- differentiate between: * xpra.gl not installed: just log a debug …
- 10:01 Changeset in xpra [2330] by
- fix xor mode build support: must include in packages to install!
- 09:43 Changeset in xpra [2329] by
- refactor sys.argv parsing
- 09:29 Changeset in xpra [2328] by
- #150 fix destroy_program_variants_cb error message: clean the gl …
- 09:08 Changeset in xpra [2327] by
- #150: use glFlush instead of swap_buffers since we don't have double …
- 07:28 Changeset in xpra [2326] by
- oops: remove debug
- 07:25 Changeset in xpra [2325] by
- fix delta mode with OpenGL
- 07:15 Changeset in xpra [2324] by
- move all the gl code to a subdir and add distutils support for …
- 04:21 Ticket #225 (calculate batch delay is expensive and hurts performance) created by
- Using profiling during #224, I found that we call …
- 04:05 Ticket #224 (synchronized X11 calls and performance) created by
-
In trying to fix support for running
gtkperf, I found out that …
12/20/12:
- 11:06 Changeset in xpra [2323] by
- cope with garbage printed by pygst
- 10:13 Changeset in xpra [2322] by
- update release notes with 0.7.6 bits
- 09:58 Changeset in xpra [2321] by
- 0.7.6 release
- 09:51 Changeset in xpra [2320] by
- r2232 for 0.7.x branch: bell fix
- 09:45 Changeset in xpra [2319] by
- r2300 for 0.7.x branch: don't bother trying to deal with auto-refresh …
- 09:39 Changeset in xpra [2318] by
- r2264 for 0.7.x branch: refactor connection cleanup code
- 09:36 Changeset in xpra [2317] by
- r2265 for 0.7.x branch: ensure the tray menu entries that end up …
- 09:25 Changeset in xpra [2316] by
- r2249 for 0.7.x branch: always print the disconnection message
- 09:23 Changeset in xpra [2315] by
- r2241 for 0.7.x branch: fix clipboard toggle log message, was …
- 09:21 Changeset in xpra [2314] by
- r2233, r2235 and r2236 for 0.7.x branch: clipboard flag handling fixes
- 09:15 Changeset in xpra [2313] by
- r2226 for 0.7.x branch: try to disconnect all potential clients on …
- 09:12 Changeset in xpra [2312] by
- r2215 for 0.7.x branch: don't log or raise an error if we're closed, …
- 09:11 Changeset in xpra [2311] by
- r2212 for 0.7.x branch: locking fixes and lower start delay
- 09:06 Changeset in xpra [2310] by
- r2196 for 0.7.x branch: call both send_damage_sequence and mmap …
- 08:37 Changeset in xpra [2309] by
- suppress more warnings triggered by gtkperf
- 08:29 Changeset in xpra [2308] by
- error out on overly large windows rather than guessing some wrong …
- 08:28 Changeset in xpra [2307] by
- damage cleanups: * if we fail to xdamage_acknowledge, then …
- 08:13 Changeset in xpra [2306] by
- remove log's special "type" parameter, was only used in a handful of …
- 08:11 Changeset in xpra [2305] by
- make code more readable
- 06:26 Changeset in xpra [2304] by
- workaround windows that get mapped a lot very quickly (gtkperf): if we …
- 06:11 Changeset in xpra [2303] by
- debugging tweaks: less debug in x_event_filter critical path unless …
- 03:22 Changeset in xpra [2302] by
- basic batching for cursors so we don't max out the connection with …
- 02:19 Changeset in xpra [2301] by
- signal handling: * first signal exit function now called with HIGH …
- 02:09 Changeset in xpra [2300] by
- don't bother trying to deal with auto-refresh when the primary …
- 01:58 Changeset in xpra [2299] by
- most svn clients still have problems with https and multi certs per …
12/19/12:
- 18:55 Changeset in xpra [2298] by
- make it easier to trace specific threads with pycallgraph: use …
- 17:38 Changeset in xpra [2297] by
- pre-define some sets to make it easier to investigate particular areas
- 17:37 Changeset in xpra [2296] by
- move test to where it belongs and add missing package files
- 15:36 Changeset in xpra [2295] by
- oops: if corral_window is unset we would loop forever! (called from …
- 11:20 Changeset in xpra [2294] by
- logging tweaks/optimizations: * remove unhelpful logging from critical …
- 11:00 Changeset in xpra [2293] by
- oops
- 10:58 Changeset in xpra [2292] by
- more window fixes: * if the window's constrained size is invalid, log …
- 10:57 Changeset in xpra [2291] by
- more gtkperf fixes, especially for "too many event receivers" …
- 10:49 Changeset in xpra [2290] by
- do all logging via local utility methods so we can more easily no-op …
- 10:47 Changeset in xpra [2289] by
- much faster inlined version of the error handler (wimpiggy.error) used …
- 10:43 Changeset in xpra [2288] by
- better error message when we failed to get the damage pixels (aka …
- 10:42 Changeset in xpra [2287] by
- verify dimensions ourselves so we can print them with the error rather …
- 10:41 Changeset in xpra [2286] by
- simplify
12/18/12:
- 18:48 Changeset in xpra [2285] by
- use explicit sync call for configure event
- 18:47 Changeset in xpra [2284] by
- explicit sync call for property change (can run from gtk event handler)
- 18:46 Changeset in xpra [2283] by
- whitespace and import cleanup
- 18:28 Changeset in xpra [2282] by
- * explicit synced call for get_default_cursor (in setup) * avoid trap …
- 18:26 Changeset in xpra [2281] by
- re-arrange all setup/cleanup and error handling: * composite does not …
- 17:58 Changeset in xpra [2280] by
- since errors can occur in the gdk.Cursor constructor, we want them …
- 17:57 Changeset in xpra [2279] by
- set_workspace: * don't bother sending the message it if already …
- 17:53 Changeset in xpra [2278] by
- provide root_set utility for setting properties on the root window
- 17:45 Changeset in xpra [2277] by
- * manage client may fail, so guard it * provide utility method for …
- 17:34 Changeset in xpra [2276] by
- use synced calls for XChangeProperty
- 11:38 Changeset in xpra [2275] by
- no need to use an X11 property for our internal tray flag
- 11:35 Changeset in xpra [2274] by
- ensure we clean references after we dispose of the objects (and avoid …
- 11:34 Changeset in xpra [2273] by
- also print signal name here, but add "deadly" to be able to …
- 10:34 Changeset in xpra [2272] by
- better debugging: * log X11 window id in x_event_filter debug message …
- 10:32 Changeset in xpra [2271] by
- explicitly set when we want synced/unsynced X11 calls
- 08:41 Changeset in xpra [2270] by
- explicitly set that we want synced X11 calls in codepaths where we are …
- 08:35 Changeset in xpra [2269] by
- explicitly set that we want synced X11 calls in codepaths where we are …
- 08:32 Changeset in xpra [2268] by
- better X error messages
12/17/12:
- 17:59 Changeset in xpra [2267] by
- better X11 event debugging: * always record the serial * warn if we …
- 17:57 Changeset in xpra [2266] by
- print signal name instead of number
- 17:56 Changeset in xpra [2265] by
- ensure the tray menu entries that end up relying on the server …
- 10:48 Changeset in xpra [2264] by
- refactor connection cleanup code to ensure we always remove the …
- 10:24 Changeset in xpra [2263] by
- prettify string
- 10:15 Changeset in xpra [2262] by
- simplify all the GLib Xpra clients by providing a single timeout …
- 09:58 Changeset in xpra [2261] by
- fix gtkperf crash: window_info calls get_geometry so we should not …
- 08:26 Changeset in xpra [2260] by
- prettify string
- 06:38 Changeset in xpra [2259] by
- simple support for XORed delta frames negotiated with the client: * …
- 06:26 Changeset in xpra [2258] by
- more helpful error message
12/14/12:
- 11:02 Changeset in xpra [2257] by
- set a fixed window size for shadows so we don't have to deal with …
- 10:28 Changeset in xpra [2256] by
- sound works well enough, enable by default
- 10:28 Changeset in xpra [2255] by
- no need to fix gtk dlls if we don't copy the gstreamer ones
- 10:26 Changeset in xpra [2254] by
- move server uuid code to its own file so we can use it in both client …
12/13/12:
- 18:21 Ticket #223 (Allow the use of ssh:<host>:<display> for the start subcommand) created by
- I usually start my xpra sessions from the client, using ssh and …
12/12/12:
- 18:47 Changeset in xpra [2253] by
- "xpra info" needs password now
- 18:21 Changeset in xpra [2252] by
- if sound is not enabled on client (or if we don't have any codecs), …
- 16:56 Changeset in xpra [2251] by
- better command line usage: support signals, close file cleanly, exit …
- 12:23 Changeset in xpra [2250] by
- fix "xpra stop": process_hello does not run in main thread any more, …
- 12:17 Changeset in xpra [2249] by
- consistency: always print the "xpra client disconnected." message, …
- 10:23 Changeset in xpra [2248] by
- fix python 2.4 compatibility
12/11/12:
- 17:39 Changeset in xpra [2247] by
- we expect this variable to exist, and maybe one day it will actually …
- 16:48 Changeset in xpra [2246] by
- force clipboard sharing off when we shadow to our own display
- 16:36 Ticket #210 (avoid client server loops) closed by
- fixed: * part1 done in r2243 * we cannot do part2 easily unfortunately: the …
- 16:33 Changeset in xpra [2245] by
- when handling a deadly signal: * restore deadly_signal handler so we …
- 16:31 Changeset in xpra [2244] by
- move server-uuid check to a function so shadow server can behave …
- 11:30 Changeset in xpra [2243] by
- #210 part 1: prevent client from connecting from the server display
- 11:21 Changeset in xpra [2242] by
- initialize tray and other bits *before* we load the existing windows …
- 10:30 Changeset in xpra [2241] by
- fix clipboard toggle log message, was refencing non-existent self var …
- 04:23 Changeset in xpra [2240] by
- ensure the single shadow window has a useful name
12/10/12:
- 19:11 Changeset in xpra [2239] by
- fix shadow mode: force always batch
- 18:13 Changeset in xpra [2238] by
- implement window "group-leader" so windows belonging to the same …
- 16:09 Changeset in xpra [2237] by
- fix crash in clipboard code: r2027 changed the py2exe optimization …
- 11:23 Changeset in xpra [2236] by
- don't send clipboard tokens if server does not support clipboard - doh!
- 11:23 Changeset in xpra [2235] by
- only send changes to the clipboard flag to the server if *IT* supports …
- 11:19 Changeset in xpra [2234] by
- when we get a packet error, report the packet type
- 11:19 Changeset in xpra [2233] by
- correctly report clipboard as disabled to clients, and add some …
- 10:25 Changeset in xpra [2232] by
- if the x11 bell fails and we start using the gdk bell fallback, then …
- 10:22 Changeset in xpra [2231] by
- cleanup and simplify session_info / client_extras_base, ensure we …
- 10:00 Changeset in xpra [2230] by
- add missing constant for r2229
- 09:54 Changeset in xpra [2229] by
- use core kbd device rather than the device_id we get from the server …
- 06:51 Changeset in xpra [2228] by
- warn if the server does not ask for password and we have one specified
- 06:24 Changeset in xpra [2227] by
- fix tests
- 06:24 Changeset in xpra [2226] by
- try to disconnect all potential clients on cleanup, not just the ones …
- 05:45 Changeset in xpra [2225] by
- remove debug
- 05:41 Changeset in xpra [2224] by
- only send a new info-request if we have received the response from the …
- 05:33 Changeset in xpra [2223] by
- add ability for the client to request "info" data from the server (as …
- 05:17 Changeset in xpra [2222] by
- drop fqdn: more trouble than it is worth
- 05:01 Changeset in xpra [2221] by
- let the classes talking to Protocol inject the list of known large …
- 04:56 Changeset in xpra [2220] by
- drop fqdn: more trouble than it is worth
- 04:55 Changeset in xpra [2219] by
- don't clear the timer since we cannot be certain this is the one that …
- 04:48 Changeset in xpra [2218] by
- * send gtk3 version info if available * fix indent
12/09/12:
- 17:51 Changeset in xpra [2217] by
- getting the hostname is expensive - so don't do it on demand
- 16:45 Changeset in xpra [2216] by
- when we get a signal, try to exit normally so the cleanups will run …
- 16:37 Changeset in xpra [2215] by
- don't log or raise an error if we're closed, just return an …
- 15:59 Changeset in xpra [2214] by
- store uuid in client
- 15:58 Changeset in xpra [2213] by
- include current value
- 15:58 Changeset in xpra [2212] by
- * start with a lower batch delay * hold encoder lock before testing …
- 12:50 Changeset in xpra [2211] by
- only show per-window stats if there are more than one (otherwise …
- 10:35 Ticket #218 (Add client idle time as stat/info) closed by
- fixed: Done in r2210. With a single client connected: […]
- 10:34 Changeset in xpra [2210] by
- #218 record client input events and expose idle time - also add …
- 10:04 Ticket #217 (Expose client hostname as capability/stat/info) closed by
- fixed: done in r2209, here is a sample log message from the server: […] …
- 10:03 Changeset in xpra [2209] by
- #217: expose fqdn and hostname both ways (client and server), show it …
12/08/12:
- 16:33 Changeset in xpra [2208] by
- display (currrent, min, avg, 95 percentile, max) for all lists of …
- 15:06 Changeset in xpra [2207] by
- show more details on session info: * bytecounts and packet counts * …
- 14:06 Changeset in xpra [2206] by
- re-worked session info to show a lot more details via tabbed interface
- 14:05 Changeset in xpra [2205] by
- expose gst/pygst versions
- 14:05 Changeset in xpra [2204] by
- expose the "platform" module before our own platform module prevents …
- 13:48 Changeset in xpra [2203] by
- also expose the python version in use
- 07:24 Changeset in xpra [2202] by
- don't try to re-use the window after it is closed
12/07/12:
- 09:21 Changeset in xpra [2201] by
- ensure bandwidth graph label matches its contents (honour …
- 09:00 Changeset in xpra [2200] by
- option to turn off pixel stats
- 08:59 Changeset in xpra [2199] by
- option to draw curves instead of lines and shows dots or not (switch …
- 08:34 Changeset in xpra [2198] by
- graphs tweaks, add more options to maths functions on how we scale …
- 06:58 Changeset in xpra [2197] by
- update dependency version info: cython and video codec bits for Debian
- 06:27 Ticket #222 (Repeated keys when the server is under heavy I/O load) created by
- When the Xpra server is swapping or otherwise lagging I/O wise, the …
- 02:25 Ticket #221 (Still places that queue from the draw_thread_loop instead of the main ...) closed by
- fixed: Fixed in r2196 Sorry, was meant to commit this yesterday.. (will need …
- 02:23 Changeset in xpra [2196] by
- call both send_damage_sequence and mmap cleanup code from main UI thread
- 02:22 Ticket #220 (Make menus in Firefox work again) closed by
- fixed: I broke this in r2166, patch applied in r2195
- 02:21 Changeset in xpra [2195] by
- #220 fix get_transient_for
12/06/12:
- 22:16 Ticket #221 (Still places that queue from the draw_thread_loop instead of the main ...) created by
- I get these sometimes: […] The problem was quite reproducible …
- 21:57 Ticket #220 (Make menus in Firefox work again) created by
- When I upgraded to the current trunk, I could no longer see the …
- 08:59 Changeset in xpra [2194] by
- show sound flag status during build
- 08:17 Changeset in xpra [2193] by
- update release notes
- 08:02 Changeset in xpra [2192] by
- 0.7.5 release
- 07:52 Changeset in xpra [2191] by
- r2138 for 0.7.x branch: filter out mapping for unknown keysyms early …
- 07:48 Changeset in xpra [2190] by
- r2141 + r2142 for 0.7.x branch: try-harder to find matching keycodes …
- 07:46 Changeset in xpra [2189] by
- r2140 for 0.7.x branch: correctly detect when we have modified the …
- 07:44 Changeset in xpra [2188] by
- r2181 for 0.7.x branch: fix division by zero
- 07:38 Changeset in xpra [2187] by
- r2143 for 0.7.x branch: don't error out if symbol is empty
- 07:37 Changeset in xpra [2186] by
- r2164 for 0.7.x branch: call send from main thread only
- 07:30 Changeset in xpra [2185] by
- don't try to remove something that is not there
- 07:28 Changeset in xpra [2184] by
- if sound module is not installed don't log an error, only if it is …
- 07:20 Changeset in xpra [2183] by
- if we don't include sound, don't include pygst/gst at all
- 07:19 Changeset in xpra [2182] by
- remove unwanted debug
- 07:18 Changeset in xpra [2181] by
- fix division by zero
- 05:12 Changeset in xpra [2180] by
- re-enable ssh on win32, allow username and password to be specified in …
- 05:04 Changeset in xpra [2179] by
- bundle plink and use COPY instead of XCOPY when copying single files
- 04:26 Changeset in xpra [2178] by
- re-add missing CONNECTION_LOST / GIBBERISH to authenticated handlers
12/05/12:
- 18:17 Changeset in xpra [2177] by
- avoid gdk_property_get not implemented warning on win32
- 17:34 Changeset in xpra [2176] by
- doh
- 17:03 Changeset in xpra [2175] by
- another shortcut: don't try to run a command we don't have!
- 16:58 Changeset in xpra [2174] by
- preexec_fn is not allowed/supported on win32
- 16:58 Changeset in xpra [2173] by
- take shortcut on win32 (no x11)
- 16:43 Changeset in xpra [2172] by
- oops: cut&paste without looking - bad!
- 15:58 Ticket #219 (mosh transport) created by
- mosh could be useful: * "Mosh automatically …
- 15:26 Changeset in xpra [2171] by
- disable sound for now
- 15:21 Changeset in xpra [2170] by
- ignore pygst warnings in stdout/stderr
- 15:19 Changeset in xpra [2169] by
- fix goto switches and add gst DLLs
- 14:18 Changeset in xpra [2168] by
- only include wimpiggy.lowlevel package if server_ENABLED
- 13:40 Changeset in xpra [2167] by
- workaround for gst parsing sys.argv
- 11:29 Changeset in xpra [2166] by
- split server into server_base and server proper (pretty clean cut …
- 04:23 Changeset in xpra [2165] by
- fix pydev warnings
- 04:16 Changeset in xpra [2164] by
- ensure we always call protocol from the main thread, found some …
- 03:48 Changeset in xpra [2163] by
- properly separate DesktopManager? and its internals from the server
- 03:47 Changeset in xpra [2162] by
- fix missing arg to cancel_damage
- 02:21 Changeset in xpra [2161] by
- send the value "-1" as an unavailable marker, not -1*1000
Note: See TracTimeline
for information about the timeline view.
copyleft 2010 - 2021
